Ramblings of yet another nerd…
Several months ago, I stumbled upon an eBay special on VRS-750’s. I picked one up for $50 – at that price, it was worth having a backup on the shelf. Another guy picked one up, and it had a service tag on it indicating that it had a functional issue. Guess it was luck of …
Read More VRS 750 Interface Cable Build
One interesting aspect of the BCD-996 and similar radios is the digital command and status protocol. In digging into the software, I learned that there is a RSSI (Relative Signal Strength Indicator) included, which delivers a numeric value relative to the signal strength of a received signal. Given that I could command the radio …
Read More RSSI correlation
I previously added (as “comments” to my post on RS-232 to TTL cable) the fact that I had purchased some USB to TTL converters, intending to remove the middle man (RS-232) – and hopefully lighten my programming kit a little. The challenge to using these cables is that most radios use a single bi-directional line …
Read More A new take on the generic programming cable
[ZFP_Photo id=’325a6f68′] Cameras are cool, too…. testing the zenfolio plugin.. For the 100AW rally, I decided I wanted to catch some action photos… which is not a horrible challenge, if one has a good vantage point – at that point, it’s all camera settings. At night it becomes a bit more challenging – especially when …
Read More Photography
Many years ago, programming the memories in an amateur radio was a “neat” feature. As the capability was included in more radios, the radio manufacturers also began charging a hefty sum for the cables to do so, because they contained “Circuitry”. Many amateurs quickly learned that these adapters were little more than RS-232 to TTL …
Read More A generic radio programming cable
Another Article with back story… at about 4:20 PM, I was getting ready to leave work, when my phone rang. Bryan was asking what I knew about whetstone bridges. While it’s been many years since I was first licensed, and decided I wanted to build one that I saw either in a QST magazine, or …
Read More A Whetstone Bridge – and what it’s good for….
Well, first some background – and definitions I’ll give some basic definitions and descriptions… if you want the full detailed technical description, try here http://microwaves101.com/encyclopedia/index.cfm Network Analyzer A network analyzer is essentially a spectrum analyzer with a signal generator that follows it – both of them are locked in frequency. Many service monitors have …
Read More Return Loss – A new take on VSWR measurement
So, about a year ago, I decided I wanted to tinker with SDRs. Many of these, such as the Flex radios, were way too expensive – so I looked into softrock type radios. It didn’t take long for me to get my hands on a softrock 80M/40M/20M kit (pick a band, put the appropriate parts in). …
Read More Adding IF Taps to the FT-1000 for Station Monitoring
My thoughts on the works of others – and the performance and uses for this unique idea… Allright folks- Barry asked for it, so here it is: I was I the market for a spectrum analyzer after K9SD offered one up for about $150 – though his had the frequency range of 10 kHz – …
Read More A CHEAP Software Defined Receiver