Picking apart the MMDVM DMR Gateway .INI file
So, I’ve been having a LOT of trouble getting my MMDVM to cooperate and pass Brandmeister traffic…I could connect to the TGIF network, and got green lights on the Pi-star…
RCA 56×3 – First Steps… Inspection
OK, so I explained why I was doing this… let’s face it, the challenge is also interesting. I started by pulling the chassis out of the radio, and wiping off…
RCA 56×3 – A Different Kind of Radio Project
So I’ve gone from high tech digital TDMA type stuff back to a wooden box with high voltages and glowing tubes. During a visit to my Mom’s cousin’s house, I…
DMR Radio Programming Tool
or “Stupid Excel Tricks”, Part 1 So, the CPS (programming software) for both the Anytone 878 and Connect Systems radios is atrocious… well.. in my opinion. I’m used to Astro…
Stupid Astro tricks, Part 1
Will there be a part 2? we’ll see. At one time, I had several XTL-5000 radios in my truck – and accessories like VRS750s (vehicular repeater) and System 9000 PA…
Another SDRTrunk update
So, I posted a while ago about my SDRTrunk setup using a USB hub and a couple RTL-SDR sticks. This setup worked, but I wanted it to be more capable,…
Cable Modem Spectrum Analyzer
Another solution in search of problems, right? I work every day with spectrum analyzers and receivers – so it’s natural that they would have a place on my workbench. When…
Anytone 878 – Talk Permit Tones
This is a short post… just something I didn’t want to lose, and can no longer find the original source for. The talk permit and post-call tones are, to say…
DMR – Multiple Networks on a single MMDVM
I’ll start with the link: In the past, I’ve tried manually configuring networks, with no luck – but by copying the above networks (I disabled DMR+, just because I don’t…
Mobile Install 3.0… Equipment Installation
In this installation of my rambling… how did I physically install the radios. This one is not entirely groundbreaking. Both pros and well disciplined amateurs have been using modular or…