Anytone Radio New Codeplug Generation using RT Systems Software
This is maybe not per any instructions they have, but it’s based on a new codeplug I’m generating due to a move in the future (And some business travel in…
RT Systems Software for Anytone radios – some more discoveries
I’ve started delving more into the software, and editing my old codeplug, at least for the 578. I’ll try and more or less synchronize it with the 878 later. As…
RT System’s Software: Anytone 878, First Impressions, and a 578 follow up
There’s not much to be said here – the 878 software is almost identical to the 578, but it’s tailored for the slightly different feature set. I was hoping I…
RT Systems’ Anytone 578 Software: Quick Update 1
In my previous post, I noted that the RT Systems software had at least one flaw in the development environment, which was causing an error when opening certain menus. I…
RT Systems’ Anytone 578 Software: Initial Impressions
Initial Thoughts: I bit the bullet and paid $25 for the RT systems software for my Anytone 578, because, well, the Anytone software is junk…. but it’s the same look…
Some DMR programming thoughts (a draft post)
So… I am by NO means an expert… but I’ve had some thoughts on DMR programming before, and I have some additional thoughts to share. Contacts The radio can support…
DMR Radio Programming Tool
or “Stupid Excel Tricks”, Part 1 So, the CPS (programming software) for both the Anytone 878 and Connect Systems radios is atrocious… well.. in my opinion. I’m used to Astro…
Anytone 878 – Talk Permit Tones
This is a short post… just something I didn’t want to lose, and can no longer find the original source for. The talk permit and post-call tones are, to say…