Picking apart the MMDVM DMR Gateway .INI file
So, I’ve been having a LOT of trouble getting my MMDVM to cooperate and pass Brandmeister traffic…I could connect to the TGIF network, and got green lights on the Pi-star…
Ramblings of yet another nerd...
So, I’ve been having a LOT of trouble getting my MMDVM to cooperate and pass Brandmeister traffic…I could connect to the TGIF network, and got green lights on the Pi-star…
OK, so I explained why I was doing this… let’s face it, the challenge is also interesting. I started by pulling the chassis out of the radio, and wiping off…
So I’ve gone from high tech digital TDMA type stuff back to a wooden box with high voltages and glowing tubes. During a visit to my Mom’s cousin’s house, I…
or “Stupid Excel Tricks”, Part 1 So, the CPS (programming software) for both the Anytone 878 and Connect Systems radios is atrocious… well.. in my opinion. I’m used to Astro…
Will there be a part 2? we’ll see. At one time, I had several XTL-5000 radios in my truck – and accessories like VRS750s (vehicular repeater) and System 9000 PA…
So, I posted a while ago about my SDRTrunk setup using a USB hub and a couple RTL-SDR sticks. This setup worked, but I wanted it to be more capable,…
Another solution in search of problems, right? I work every day with spectrum analyzers and receivers – so it’s natural that they would have a place on my workbench. When…
This is a short post… just something I didn’t want to lose, and can no longer find the original source for. The talk permit and post-call tones are, to say…
In this installation of my rambling… how did I physically install the radios. This one is not entirely groundbreaking. Both pros and well disciplined amateurs have been using modular or…
So…. this is as good a place as any to discuss this concept. In many professional applications, the power harness for the radio has a long positive lead that is…