Tag: Programming

This is maybe not per any instructions they have, but it’s based on a new codeplug I’m generating due to a move in the future (And some business travel in…

I’ve started delving more into the software, and editing my old codeplug, at least for the 578. I’ll try and more or less synchronize it with the 878 later. As…

In my previous post, I noted that the RT Systems software had at least one flaw in the development environment, which was causing an error when opening certain menus. I…

or “Stupid Excel Tricks”, Part 1 So, the CPS (programming software) for both the Anytone 878 and Connect Systems radios is atrocious… well.. in my opinion. I’m used to Astro…

“Your codeplug will never be complete” – a quote I saw on a site about amateur radio DMR codeplug generation. I’ll argue against that thought.  I wish I could get…

So, this started out as an exercise to see if could get Microsoft Excel (through VBA) to directly talk to my Uniden scanner. I’ve done this in labview quite a…

ok – this should be the final post….   I did one more batch of updates…  this time I designed for EMI.  Not only did I ensure I had full isolation…

Over the past couple weeks, I have been tinkering more with the soundcard interface. I started using FreePCB (http://www.freepcb.com/) – which is a VERY nice PCB drawing program with gerber…

One of the interesting things about equipment on the market today is the commonality between different models and bands of radio equipment.  In years past, it was just the basic…

Today, I tackled interrupts. I’m not so sure I tackled interrupts, so much as i worked on determining the dynamic tuning step timing. I needed a routine to wait for…