Tag: Ham Radio

In my previous post, I noted that the RT Systems software had at least one flaw in the development environment, which was causing an error when opening certain menus. I…

Initial Thoughts: I bit the bullet and paid $25 for the RT systems software for my Anytone 578, because, well, the Anytone software is junk…. but it’s the same look…

With the sunspot cycle coming to a point of good higher frequency propagation, I put a 10 meter radio in the car.   Why not?  The President Lincoln II+ has some…

Well, the original configuration (SteppIR controller passing commands between the radio and PW-1) worked… for a while. I suspect there was some collision or synchronization that fell out of timing…

I’ll spare the reader yet another glowing review for the Mini1300 analyzer. No I won’t – I’m still going to spew my thoughts on this thing.   I picked one up…

Background Last year, I acquired a SteppIR “SmallIR 80” antenna… This is their “SmallIR” 20 – 6 vertical, with an additional coil for 30/40/80 meters. I don’t know if it’s…

I love the Icom 7300 – it has a TON of features. One of the intriguing features is the voice keyer – the radio has 8 memory slots, four of…

I enjoy contesting…. and often do so with a second person as a logger. A couple years back, I picked up a behringer HA400 to split audio between 2 sets…

So… I am by NO means an expert… but I’ve had some thoughts on DMR programming before, and I have some additional thoughts to share. Contacts The radio can support…

So, I’ve been having a LOT of trouble getting my MMDVM to cooperate and pass Brandmeister traffic…I could connect to the TGIF network, and got green lights on the Pi-star…